GOVERNMENT OF
DIRECTORATE
GENERAL OF SUPPLIES & DISPOSALS
Telegram POORTINIP
Fax 011-23345536/23340497
Telephone No. 011-23360437/23360610/23362991
Website http://dgsnd.nic.in
M/s Scientific Mes-Technik Pvt Ltd.,
B-14,
Pologround, Industrial Estate,
Indore-452 015.
Phone- 0731-2422330-33 Fax:0731-2422334,
2561641
Email:
info@ scientificindia.com www.scientificindia.com
Ref : (1) This Office Tender Enquiry
No.Oscope/IT-3/RC-D2040000/0706/83
opened on
12.07.2005.
(2) Your Quotation No.:
Q-2/677/677/2005 dated 09.07.2005.
Dear Sirs,
In continuation
to this office Advance Rate Contract of even number dated 18.08.2005. You are hereby informed that your above
referred tender read with subsequent letter(s) mentioned above for the stores
specified in schedule annexed has been accepted. This rate contract will be governed by the
terms & conditions brought in the Form No.DGS&D-1001**. The Rate Contract and the schedules annexed
here to shall be the sole repository of this Rate Contract/Transaction.
SCHEDULES ANNEXED:
Schedule ‘A’ Description of Stores, Prices,
Duties/Taxes.
Schedule ‘B’ Special conditions of Contract.
Schedule ‘C’ List of parallel Rate Contracts
Schedule ‘D’ Special instructions to Rate Contract
holders
Yours faithfully
(V.P.Gulati)
Section Officer
For & on behalf
of the Purchasers named in the Form DGS&D-1001
** Form DGS&D –1001 is available from the DGS&D, New Delhi
sales counter and its
Regional Offices at Mumbai /
Kolkata / Chennai on payment of Rs.50/-.
Copy to :-
1. The Chief Controller of Accounts,
Department of commerce (supply division),
2. Dy. Director General of
Supplies & Disposals, Kolkata/ Mumbai/ Chennai.
3. Dy. Director General
(QA), Kolkata/Mumbai/Chennai
4. Inspecting Authority
: ADG (QA), DGS&D,
Jeevan Tara Bldg.,
5, Sansad Marg,
5. Quality Assurance Officer
: Director of Quality Assurance
DGS&D, Jawahar Saw Mills Compound, 1st
flooar, Outside Sahpur Gate,
Ahmedabad – 380 004.
6.
Inspecting Officer : Dy.
Director (QA),
Opp. GPO,
7. Concurrent Audit
8. MIS Cell
9. Ledger Clerk
10. O.L. Section
11. All Direct Demanding Officers (DDOs) as
per mailing list of DGS&D.
12. R.L.O
(V.P.Gulati)
Section Officer
For Director General of Supplies &
Disposals
2. (a) Name &
address of firm M/s
Scientific Mes-Technik Pvt Ltd.,
B-14, Polo Ground Industrial Estate,
Indore-452015
(b) Name & address of Manufacturer M/s Scientific Mes-Technik Pvt Ltd.,
B-14, Polo Ground Industrial Estate,
Indore-452015
3. Validity of R/C 18.08.2005 to 31.08.2006
4. Description of items, specifications As per Annexure –P.
& unit price
6. Sales Tax LST & CST extra as applicable at the time of delivery. Present rate of LST is 9.2% and C.ST. @ 4% against form C/D
else 10% or as applicable at the time of despatch.
7. Octroi ‘NIL’ against Octroi Exemption Certificate to be provided by the indentor along with order otherwise extra, if applicable.
8. Excise duty Extra as applicable at the time of despatch. Present rate @16.32%.
9. Delivery period 8-10 weeks after receipt of supply order.
10. Monetary Limit Rs. 2.49 Crores
11. Slab Discount Nil.
12. Prices Firm and Final
13. Maximum order value of single order Rs.2.49 Crores
14. Status of R/C holding firm SSI Unit
15. Paying Authority Chief Controller of Accounts,
Deptt. of Commerce, (Supply Divn),
16A
New Delhi-110 011.
16. Inspecting Authority ADG (QA), DGS&D,
17. Quality Assurance
Officer Director
(QA), Ahmedabad or his authorized representative at Indore.The address of
inspecting officer is Dy. Director(QA) old
Opp. GPO,
Tel No. 0731-2707177
18. Place where the stores are to be M/s Scientific Mes-Technik Pvt. Ltd.
Tendered for Inspection B-14, Industrial Estate, Pologround,
Indore-452015
.
Schedule - B
Special Conditions of
Contract:
forwarding and insurance.
4. Payment
terms :
98% payment would be payable against proof of inspection and consignee receipt certificate issued by consignee for having received the stores in full and in good conditions. The balance 2% after successful demonstration and acceptance of stores by consignee and on submission of Bank Guarantee for balance 2% value of order valid till 2 months beyond the warranty period indemnifying the purchaser against all losses incurred by the purchase during the guarantee/warranty.
6.
Environmental Test Report:
The supplier shall furnish complete and
satisfactory type test certificate covering specifications/parameters and
Environment test from DGS&D approved lab at the time of inspection to the
Inspection Officer.
Operating Conditions :-
5 to 45 degree C and 80% RH at 30 degree C.
7.
No assistance for import of finished product
or raw material will be provided.
All other terms and conditions as per standard conditions mentioned in form DGS&D-1001.
Annexure –P
PRICE SCHEDULE
(with 3 years warranty)
Item 2 (Schedule -I)
30 MHz Analog Oscilloscopes Two Channel, Four Trace,
Monochrome display.
The Analog Oscilloscopes shall be Portable, rugged including features of digital frequency readout component tester and sweep delay.
|
Sl.No. |
Features |
Model:
SM 330
|
Price
(Rs.) |
|
1 |
Bandwidth |
|
16,900/- |
|
2 |
No. Of Channels |
Two Channels – four Trace |
|
|
3 |
Deflection Coefficient |
In 12 calibrated step 1mV to 20V/div in |
|
|
4 |
Rise Time |
<11.6 ns |
|
|
5 |
Variable Hold off |
10:1 Variable Hold Off for stable triggering |
|
|
6 |
Input impedance |
1Mohm//25pF |
|
|
7 |
Time Base coefficients |
18 calibrated steps 0.5microsec/cm to 0.2 sec/cm with X10 magnifier to 20ns/cm |
|
|
8 |
Trigger system: |
Automatic and normal ( level adjustable) |
|
|
9 |
Source |
CH I, CH II, ALT, LINE, EXTERNAL |
|
|
10 |
Slope |
Positive / negative |
|
|
11 |
Coupling |
AC/DC/HF/LF |
|
|
12 |
Sensitivity |
Internal 0.5 Div External 0.5 V |
|
|
13 |
Trigger Bandwidth |
40MHz |
|
|
14 |
Horizontal Deflection Bandwidth |
DC-3MHz ( -3dB) |
|
|
15 |
X-Y mode |
Phase shift <3 degree upto 100 kHz |
|
|
16 |
Display |
Mono |
|
|
17 |
Max Input voltage |
300 V rms (CAT II) |
|
|
18 |
Calibrator Operator |
1kHz square wave (0.2 Vpp) for probe compensation |
|
|
19 |
Z modulation |
TTL level. |
|
|
20 |
Power Supply |
220V- 240 V +/- 10 %, 50 Hz AC Supply |
|
|
21 |
Component Tester |
Built in single touch |
|
|
22 |
Continuity Tester |
With Beeper |
|
|
23 |
Operating Conditiions |
5 to 45 degree C and 80% RH at 30 degree C |
|
|
24 |
Accessories |
Two 1X/10X Switchable probes per channel, BNC-BNC Cable, Power Cord, Manual, Calibration Certificates |
|
Item 4 (Schedule -I)
100 MHz Analog Oscilloscopes Two Channel,
Monochrome display.
The Analog Oscilloscopes shall be Portable, rugged including features of digital frequency readout component tester and sweep delay.
|
Sl. No. |
Features |
Model:
SM 332
|
Price (Rs.)
|
|
1 |
Bandwidth |
|
49,500/- |
|
2 |
No. Of Channels |
Two Channels |
|
|
3 |
Deflection Coefficient |
In 14 calibrated step 1mV to 20V/cm. |
|
|
4 |
Rise Time |
< 3.5 ns |
|
|
5 |
Variable Hold off |
10:1 Variable Hold Off for stable triggering |
|
|
6 |
Input impedance |
1Mohm/15pF |
|
|
7 |
Time Base coefficients |
5ns to 0.5s/div |
|
|
8 |
Trigger system: |
Automatic and normal ( level adjustable) |
|
|
9 |
Source |
CH I, CH II, ALT, LINE, EXTERNAL |
|
|
10 |
Slope |
Positive / negative |
|
|
11 |
Coupling |
AC/DC/HF/LF |
|
|
12 |
Sensitivity |
Internal 0.5 Div External 0.3 V |
|
|
13 |
Trigger Bandwidth |
200 MHz |
|
|
14 |
Horizontal Deflection Bandwidth |
DC-3MHz ( -3dB) |
|
|
15 |
X-Y mode |
Phase shift <3 degree below 220 kHz |
|
|
16 |
Auto Set: |
Automatic parameter selection with digital readout |
|
|
17 |
Save/Recall |
9 User defined parameter settings |
|
|
18 |
Sensitivity |
Internal 0.5 Div External 0.3V |
|
|
19 |
Interface |
Interface : RS 232 with PC software |
|
|
20 |
Max Input voltage |
300 V rms (CAT II) |
|
|
21 |
Cursor Measurement |
Cursor Measurement: Voltage, time and frequency. |
|
|
22 |
Calibrator Operator |
1kHz square wave for probe compensation |
|
|
23 |
Power Supply |
105V- 240 V +/- 10 %, 50 Hz AC Supply |
|
|
24 |
Component Tester |
Built in single touch |
|
|
25 |
Continuity Tester |
Continuity Tester with Beeper |
|
|
26 |
Operating Conditions |
5 to 45 degree C and 80% RH at 30 degree C |
|
|
27 |
Accessories |
Two 1X/10X Switchable probes, BNC-BNC Cable, Power Cord, Manual, Calibration Certificates |
|
Schedule –C
List of Parallel Rate contract holders
|
S.No. |
Name of the
Firm |
Rate Contract
No. and date |
|
1. |
M/s Agmatel E-366, 2nd floor, Nirman Vihar, Vikas Marg, New Delhi-110092. |
Rate Contract No. Oscope/IT-3/RC-D2040000/ 0706/83/COAD/1208 dated
18.08.2005 (For
various ratings of Digital Storage
Oscilloscopes) |
|
2. |
M/s Scientech Technologies
Pvt. Ltd. 94-101,Electronic Complex, Pardesi Pura, |
|
|
3. |
M/s Scientific Mes-Technik
Pvt Ltd., B-14, Polo Ground Indl. Estate, Indore-452 015. |
|
|
4. |
M/s Anshuman, Plot No. 13, Sthairya, Pune-411 052. |
|
|
5. |
M/s Aplab Ltd., A-5, Wagle Industrial
Estate, THANE-400 604. |
|
Note: All the R/C particulars including prices in respect of individual R/Cs are available on DGS&D website, The access code of DGS&D website is www.dgsnd.nic.in and www.dgsnd.gov.in
(V.P.Gulati)
Section Officer
For and on behalf of the purchasers named in the schedule/Form DGS&D-1001
Schedule –D
Special
Instructions to R/C holders:
Rate contract holders are advised that before entertaining the supply order, they should ensure the availability of following certificates from DDO’s.
a)That they
are Central Government Department drawing funds from consolidated fund of
b) The expenditure involved for the purchase has received the sanction of the competent financial authority.
c)The funds are available under the proper head in the sanctioned budget allotment for the year.
d) They have been fully authorized by the department to sign the supply order and incur the liability in respect of stores being ordered.
(V.P.Gulati)
Section Officer
For and on behalf of the purchasers named in the schedule/Form DGS&D-1001